BE- Gas Saver

SKU: 1200
Category: Heating

The saver improves the combustion process in all types of gas burners. For home heating.

299,00 €

incl. 19% VAT , plus

Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Please note the permissible order quantity of 1 Units.

Description
Reviews

Improve the burning Performance.

Fix the BIO-energetic gas saver with a cable tie on the supply line (Please use thin-walled place, so that the saver is as close as possible to the gas) to the gas burner. You can use it with any type of gas. So now you have savings and save the environment. We recommend that you have a burner reset after 4-8 weeks so that it can be adjusted to the new combustion conditions. (It may be that the air supply must be throttled) It is best if you now observe the gas consumption over a longer period of time, as the heating periods are different. You will see a difference.

How does the bio-energy gas saver work?

The metal pin is not magnetic! It has been modified by means of a special procedure in the molecular field. This process allows the Bio energetic gas saver to interact with the gas to change the molecular structure of the hydrocarbon. Which leads to a better combustion process and exhaust gas reduction.

35 yr old gas heater like new, small pellet heater has an impossible 93% efficiency rating

Field report:
Viessmann gas heating Bj.1982 Vitola Biferral
Pellet stove MCZ Panorama

Dear Mr. Renner
as a long-time user of your excellent products, I have had another super experience. My heating in the house is 35 years old.

I got a visit from the responsible district chimney sweep who explained to me that my heating is over 30 years old and must be replaced.

Since I have equipped the heater with a gas saver (but have not communicated it until then) I asked to check the exhaust gases and all values that lead to replace the heater.

The values of the heating were so devastatingly good for the chimney sweep that he wanted to exchange the measuring device.

After my explanation (demonstration) that the flame of the heater is steel blue and the measured value of the exhaust gases is so low, there was a statement that the heater can live 100 years.

I decided to buy an electronic CO2 indicator exhaust gas meter exhaust gas measurement heater to prevent manipulation of the values of the measuring people

Pelletofen MCZ Panorama mit Vorratsbehälter 15 Kg (1 Sack)

1 pellet saver was glued to the housing of the screw conveyor. Today, the stove has an efficiency of about 93%.

The color of the ash is light gray, the color of the firebricks is light gray to white in the burning Phase.

The ash container consists of two parts. In the center, ignition and combustion takes place. Surrounded by an ash container with a volume of about 1 liter and another grate for the ash. After switching off (cooling down) the furnace, a tablespoon +pins is used to clean the combustion chamber from ash residues. Only once a month (with daily use of 10 - 12 hours) we suck out the ash container!!!

Again, the chimney sweep wanted to be active and sweep the chimney. No permission was given because there was no ash in the chimney.

With kind regards

Joachim Müller

Rüstringer Str. 31

26340 Zetel

Fon: 04453-930381

Gas boiler gets better over the years!

Dear Mr. Renner,

I am enclosing the measurement logs from 2015 and 2016 of our 1996 gas heating System.

The readings are very good and are improving instead of getting worse. We have a BE gas saver on both the gas burner and the therme and are very happy with the products.

CO from 4ppm to 0.00 and exhaust gas loss 1% better

We have not had a single failure in the last three years. Last problem on 26.05.2014 before installation of the BE gas savers.

With kind regards

Marion Schumann

www.Ent-Decke.net

Tel.: +49 (0) 172 41 26 105

info@ent-decke.net

Good news from the chimney sweep: gas heating 18 years and values like a "new".

Dear Mr. Renner,

we have installed 3 BE gas savers for a few months now. One for the heating burner, one for the hot water burner and one for our gas stove. 2 days ago the chimney sweep was there and confirmed us the following: Measurement result very good ! The combustion is clean and environmentally friendly = energy and cost saving. I have attached protocols, a photo of the heating also. The heating is now about 18 years old and everything is fine. The mechanic from the heating maintenance also confirms this.

Efficiency 94% and CO; 4ppm, very good values!

Before we installed the gas savers, the burner went out every now and then and we had to restart. Was not so nice when you needed hot water in the morning. Since we have the Gassaver this has not happened. Not a single malfunction.

Thank you, now we like to try the Fuelsaver.

Love greetings
Marion Schumann from Hamburg

marion_schumann@t-online.de

BE gas saver in a bakery saves 500€ in 6 months

We work in the third generation as a country bakery in Löwenberger Land, so since 1927. We are on average always 10 people in the business. There are still some pastries that are very individual and can only be found with us. However, this requires a lot of energy, which we generate with natural gas. That's how I became aware of the Gassaver, which is supposed to reduce not only consumption, but also the exhaust fumes from our heaters, which is also important to me. I have been using two Gassavers for half a year now and I must say I am very satisfied. The bakery has a very constant energy demand and after 6 months I have already saved 500 € there, really incredible!

And my private heating system had very poor exhaust values and has repeatedly failed the inspection by the chimney sweep in recent years and would now have had to be replaced, But with the Gassaver I achieve the new exhaust values and can still keep the heater, which saves me an investment of many thousands of euros. The values without service are still great after a year.

Thank you for the good work and please keep it up!

Fred Plessow, 16775 Teschendorf fred.plessow@web.de

Old gas boiler 1980 to continue operation

Thank you for your gas boiler saving device. The flue gas loss had dropped from 13.5% last year to 9.5% and the CO emission was only 5 ppm. The black man could not believe his eyes. I am very satisfied and will gladly recommend you to others. Greetings to AT, E. Faustmann.

ENGINEERING OFFICE FAUSTMANN GMBH
(Field of activity: TECHNICAL MONITORING OFFICE)

Seat of the GmbH: 30880 Laatzen, Lüneburger Straße 18 G
Phone: 05102 - 9391- 0 Fax: 05102 - 9391- 50

Field report about the gas saver on the gas line in the catering kitchen.

I have been running a restaurant for over 30 years and know my gas oven well. After installing the gas saver, I noticed the following changes, the flame was about 20 cm high with the same setting, without the pin about 5 cm. After readjustment I thought it all fit, however I then noticed another effect, the flame is obviously much hotter, because I burned some food. Due to the too late readjustment, unfortunately, a burner cap went defective, he burned through.

Now that the Offen is set correctly, I can tell based on the position of the regulator that I definitely need less gas.

On their website I found an ultra fine dust measurement with and without a pen on a Lada, so I assume that there is now also less ultra fine dust in the kitchen.

I can only recommend this product, protects health and is sustainable. Actually, the commercial kitchen manufacturers should firmly integrate this product into the gas supply line.